Chat with us on WhatsAppCall Learnizo

KTU 2024 Scheme · Semester 4 · Program Elective I — Electronics and Communication Engineering

Digital Systems and Vlsi Design (PEECT415) Syllabus

Official KTU 2024 Scheme syllabus for Digital Systems and Vlsi Design, Semester 4, Program Elective I — Electronics and Communication Engineering (Electronics and Communication Engineering).

This page compiles APJ Abdul Kalam Technological University's officially published 2024 Scheme syllabus for Electronics and Communication Engineering, Semester 4, sourced directly from KTU's official website (ktu.edu.in). Learnizo is an independent online tuition platform and is not affiliated with, endorsed by, or officially connected to APJKTU. The university may revise syllabus content after this page was last updated — always cross-check with the official KTU source for the current, authoritative version.

Course Code

PEECT415

Credits

3

Teaching Hours

3:0:0:0 (L:T:P:R)

CIE Marks

40

ESE Marks

60

Exam Duration

2 Hrs. 30 Min.

Prerequisites

PBECT304 Logic Circuit Design

Semester

Semester 4

Course Objective

To equip students with comprehensive knowledge and skills in designing, analysing, modelling, and optimizing clocked synchronous sequential networks (CSSNs). To provide a thorough understanding of the designing, analyzing, and optimizing techniques of asynchronous sequential circuits (ASCs). To equip students with the knowledge and skills to identify and mitigate static and dynamic hazards and to understand fault detection and testing methods. To provide students with a comprehensive understanding of the VLSI design flow and the application of VHDL constructs and coding for combinational and sequential circuits.

Module-wise Syllabus

Module 1

9 contact hours

Clocked Synchronous Networks, Analysis of Clocked Synchronous Sequential Networks (CSSN), Mealy machine, Moore machine, Modelling of CSSN, State assignment and reduction, Design of CSSN, ASM Chart and its realization.

Module 2

9 contact hours

Asynchronous Sequential Circuits, Analysis of Asynchronous Sequential Circuits (ASC), Flow table reduction, Races in ASC, State assignment problem and the transition table, Design of Asynchronous Sequential Circuits, Design of ALU.

Module 3

9 contact hours

Hazards - static and dynamic hazards in combinational networks, Essential Hazards, Design of Hazard free circuits, Data synchronizers, Mixed operating mode asynchronous circuits, Practical issues- clock skew and jitter, Synchronous and asynchronous inputs, Flip-Flops and Simple Flip- Flop Applications, switch debouncer. Faults, Fault table method - path sensitization method - Boolean difference method, Kohavi algorithm, Automatic test pattern generation - Built in Self-Test (BIST)

Module 4

9 contact hours

VLSI Design flow: Design entry: Schematic, FSM & HDL, VHDL Hardware Description Language, VHDL Modules, VHDL Processes, Different modeling styles in VHDL, Data types and operators, Objects, Dataflow, Behavioral and Structural Modeling, Synthesis, Simulation. VHDL constructs and codes for combinational and sequential circuits.

Course Outcomes

  • CO1Design, analyze, and model clocked synchronous sequential networks (CSSNs), optimize state assignment and reduction, and effectively utilize ASM charts for the realization of complex digital systems.
  • CO2Design and analyze asynchronous sequential circuits (ASCs), perform flow table reduction, address race conditions and state assignment problems, and design both ASCs and Arithmetic Logic Units (ALUs).
  • CO3Identify and mitigate static and dynamic hazards in combinational networks, design hazard-free circuits, address practical issues in digital systems and apply fault detection and testing methods.
  • CO4Explain the VLSI design flow, utilize various design entry methods, apply different VHDL modeling styles, and develop and simulate VHDL constructs for combinational and sequential circuits.

Assessment Pattern (CIE: 40 marks, ESE: 60 marks)

Continuous Internal Evaluation (CIE)

Attendance5
Assignment / Microproject15
Internal Examination 1 (Written)10
Internal Examination 2 (Written)10

End Semester Examination (ESE)

Total 60 marks, 2 Hrs. 30 Min.. See the official KTU syllabus document for the exact Part A / Part B question pattern for this course.

Textbooks & Reference Books

Textbooks

  • Digital Principles & Design — Donald G Givone (McGraw Hill Education, 2017)
  • Digital Design: Principles and Practices — John F Wakerly (Pearson India, 4th, 2008)
  • Digital Logic Applications and Design — John M Yarbrough (Cengage Learning India, 1st, 2006)
  • Digital Design: With an Introduction to the Verilog HDL, VHDL, and SystemVerilog — M.Morris Mano and Michel.D.Ciletti, (Pearson, 6th, 2017)

Reference Books

  • Digital Systems Testing and Testable Design — Melvin A. Breuer, Miron Abramovici, Arthur D. Friedman (Wiley-IEEE Press, 1st, 1994)
  • Logic Design Theory — Nripendra N. Biswas (Prentice Hall, 1993)
  • Introduction to Digital Design Using Digilent FPGA Boards: Block Diagram / VHDL Examples — Richard E. Haskell Darrin M. Hanna (LBE Books- LLC, 2019)
  • Digital Circuits and Logic Design — Samuel C. Lee (Prentice Hall India Learning Private Limited, 1980)
  • Switching and Finite Automata Theory — Zvi Kohavi, Niraj K. Jha (CAMBRIDGE UNIVERSITY PRESS, 3rd 2009)
  • Digital System Design Using VHDL — Rishabh Anand (Khanna Publishing, 1st, 2013)
  • Digital System Design Using VHDL — Lizy Kurian John, Charles H. Roth (Cengage, 1st, 2012)

Frequently Asked Questions

How many credits is KTU Digital Systems and Vlsi Design (PEECT415)?

3 credits, with 3:0:0:0 (L:T:P:R) teaching hours per week, under the KTU 2024 Scheme.

How many modules are in the PEECT415 syllabus?

4 modules, 36 total contact hours.

What is the CIE and ESE mark split for this course?

CIE (Continuous Internal Evaluation): 40 marks. ESE (End Semester Examination): 60 marks, 2 Hrs. 30 Min.. Total: 100 marks.

What are the recommended textbooks for PEECT415?

Digital Principles & Design (Donald G Givone); Digital Design: Principles and Practices (John F Wakerly); Digital Logic Applications and Design (John M Yarbrough); Digital Design: With an Introduction to the Verilog HDL, VHDL, and SystemVerilog (M.Morris Mano and Michel.D.Ciletti,).

Is this syllabus specific to one branch, or common to others too?

This Semester 4 course is listed under Program Elective I — Electronics and Communication Engineering at KTU under the 2024 Scheme — check the course header above for which branches it's common to.

Need help with KTU Digital Systems and Vlsi Design?

Learnizo offers live, 1-on-1 online tuition for KTU ECE subjects — matched to your exact module and semester.