KTU 2024 Scheme · Semester 6 · Program Core — Artificial Intelligence
Robotics and Automation (PCCAT602) Syllabus
Official KTU 2024 Scheme syllabus for Robotics and Automation, Semester 6, Program Core — Artificial Intelligence (Artificial Intelligence).
Course Code
PCCAT602
Credits
3
Teaching Hours
3:0:0:0 (L:T:P:R)
CIE Marks
40
ESE Marks
60
Exam Duration
2 Hrs 30 Min
Prerequisites
None
Semester
Semester 6
Course Objective
To enable students to understand the characteristics of robotics and the working of actuators and sensors, to teach how robots use sensors to perceive their environment, pre-process raw sensory data and segment images into meaningful regions, and to make students understand robot position and orientation, localization and the challenges of localization.
Module-wise Syllabus
Module 1
9 contact hoursIntroduction to robotics: degrees of freedom, robot types — manipulators; anatomy of a robotic manipulator — links, joints, actuators, sensors, controllers. Robot configurations — PPP, RPP, RRP, RRR. Mobile robots — wheeled, legged, aerial, underwater and surface water robots. Dynamic characteristics — speed of motion, load carrying capacity and speed of response. End effectors — mechanical grippers, special tools, magnetic, vacuum and adhesive grippers, active and passive grippers. Ethics in robotics — the 3 laws, applications of robots.
Module 2
9 contact hoursSensors, Actuators and Control: sensor classification — touch, force, proximity, vision sensors. Internal sensors — position, velocity, acceleration and force sensors; external sensors — contact and non-contact type. Digital cameras — CCD, CMOS and omnidirectional cameras; sensor characteristics. Actuators — DC motors, H-bridge, pulse width modulation, stepper motors, servos, hydraulic and pneumatic actuators.
Module 3
9 contact hoursRobotic Vision: sensing, pre-processing, segmentation, description, recognition, interpretation, feature extraction, camera sensor hardware interfacing. Representation of transformations — pure translation, pure rotation about an axis, combined transformations, transformations relative to the rotating frame. Differential-drive wheeled mobile robots, degree of mobility, wheel configurations, holonomic and nonholonomic robots, omnidirectional wheeled mobile robots.
Module 4
9 contact hoursPosition and Orientation: representing robot position, basics of reactive navigation; robot localization and its challenges — continuous representations, decomposition strategies, current challenges in map representation. Probabilistic map-based localization (Kalman method only), autonomous map building, Simultaneous Localization and Mapping (SLAM) — mathematical definition and types. Path planning — graph search, deterministic graph search, BFS, DFS, Dijkstra's algorithm, A*, D*, potential field based path planning. Obstacle avoidance — Bug algorithm, Vector Field Histogram, dynamic window approaches. Navigation architectures — modularity for code reuse and sharing, control localization.
Course Outcomes
- CO1Explain the concepts of manipulator and mobile robotics.
- CO2Choose suitable sensors, actuators and control for robot design.
- CO3Develop kinematic models of mobile robots and understand robotic vision intelligence.
- CO4Apply localization and mapping methods in robotics.
- CO5Plan the path and navigation of a robot by applying an artificial intelligence algorithm.
Assessment Pattern (CIE: 40 marks, ESE: 60 marks)
Continuous Internal Evaluation (CIE)
| Attendance | 5 |
| Assignment / Microproject | 15 |
| Internal Examination 1 (Written) | 10 |
| Internal Examination 2 (Written) | 10 |
End Semester Examination (ESE)
Total 60 marks, 2 Hrs 30 Min. See the official KTU syllabus document for the exact Part A / Part B question pattern for this course.
Textbooks & Reference Books
Textbooks
- Introduction to Autonomous Mobile Robots — R. Siegwart, I. R. Nourbakhsh, D. Scaramuzza (MIT Press, USA, 2nd edition, 2011)
- Embedded Robotics: Mobile Robot Design and Applications with Embedded Systems — Thomas Bräunl (Springer, 2nd edition, 2006)
- Introduction to Mobile Robot Control — S. G. Tzafestas (Elsevier, 1st edition, 2014)
- Artificial Intelligence for Robotics — Francis X. Govers (Packt Publishing, 1st edition, 2018)
- Introduction to Robotics: Analysis, Control, Applications — Saeed B. Niku (Wiley, 2nd edition, 2011)
- Industrial Robotics: Technology, Programming and Applications — Mikell P. Groover (McGraw Hill Education, 2nd edition, 2017)
Reference Books
- Introduction to Robotics — John J. Craig (Pearson Education Inc., Asia, 3rd edition, 2005)
- Introduction to Robotics — S. K. Saha (Tata McGraw Hill Education, 2nd edition, 2014)
- Robotics, Vision and Control: Fundamental Algorithms in MATLAB — Peter Corke (Springer-Verlag Berlin Heidelberg, 2nd edition, 2021)
Frequently Asked Questions
How many credits is KTU Robotics and Automation (PCCAT602)?
3 credits, with 3:0:0:0 (L:T:P:R) teaching hours per week, under the KTU 2024 Scheme.
How many modules are in the PCCAT602 syllabus?
4 modules, 36 total contact hours.
What is the CIE and ESE mark split for this course?
CIE (Continuous Internal Evaluation): 40 marks. ESE (End Semester Examination): 60 marks, 2 Hrs 30 Min. Total: 100 marks.
What are the recommended textbooks for PCCAT602?
Introduction to Autonomous Mobile Robots (R. Siegwart, I. R. Nourbakhsh, D. Scaramuzza); Embedded Robotics: Mobile Robot Design and Applications with Embedded Systems (Thomas Bräunl); Introduction to Mobile Robot Control (S. G. Tzafestas); Artificial Intelligence for Robotics (Francis X. Govers); Introduction to Robotics: Analysis, Control, Applications (Saeed B. Niku); Industrial Robotics: Technology, Programming and Applications (Mikell P. Groover).
Is this syllabus specific to one branch, or common to others too?
This Semester 6 course is listed under Program Core — Artificial Intelligence at KTU under the 2024 Scheme — check the course header above for which branches it's common to.
Need help with KTU Robotics and Automation?
Learnizo offers live, 1-on-1 online tuition for KTU AI subjects — matched to your exact module and semester.